2023 Denis Cimaf DAH 085B

Information

2023 Denis Cimaf DAH 085B

The DAH is a high-power, forestry brushcutting-mulching industrial system to be installed on most excavators or other carriers with articulated masts. DAH brushcutter-mulchers are designed for vegetation control work.

Features may include:

Motor
  • Variable displacement, axial-piston motor that minimizes overheating and improves re-acceleration.
Drive
  • Industrial cogged-belt drive system that prevents slippage and reduces effort applied to bearings compared with V-belts, for longer bearing life
Knives
  • Heat-treated, bolt-on forged knives that deliver maximum resistance to impact and abrasion, and that can be sharpened right on the unit
Easy Replacement
  • A single nut and bolt holds the knife in place, making replacing worn knives easy
Rings
  • Protective rings that limit the size of the bites and considerably reduce risks of breakage on the knife holders
Replaceable Liner
  • Replaceable bolt-in liner increases the frame durability.
Chevron Rows of Knives
  • Two chevron-like rows of knives that help reduce vibration during operation
Aligned Knife Configuration
  • Smaller B-sized rotor have an aligned knives configuration to help with rotor suction.

Photos

Highlights

  • Athens, Alabama
  • 2023
  • Denis Cimaf
  • DAH 085B
  • Available
  • Exterior: 66 cm (26 in)
  • Exterior: 79 cm (31 in)

Specifications

  • 2023
  • Denis Cimaf
  • DAH
  • 085B
  • General
  • Recommended Minimum Carrier Power: 40 kW (54 hp)
  • Axial Piston Motor: 60 cc
  • Rotating: 4000
  • Min. Required Continuous Flow: 95 L/min (25 gal/min)
  • Min. Operating: 275 bar (4000 psi)
  • Excavator Size: 8 - 10 t (16000 - 20000 lbs) | Cutting Distance from Ground Level: 2 cm (0.75 in) | Optimal Target Material Diameter: 10 cm (4 in) | Rotor Diameter: 35 cm (14 in) | Pressure Line I.D: #10 (0.625 in) | Return Line I.D: #10 (0.625 in) | Drain Line I.D: #8 (0.50 in)
  • 87 cm (34 in)
  • Exterior: 120 cm (47 in)
  • Exterior: 79 cm (31 in)
  • Exterior: 66 cm (26 in)
  • Approximate Typical: 510 kg (1120 lbs)
  • Number of Blades on Rotor: 15